Great, that did it. For all folks reading, i had the vlan internal policy ascending. I changed to descending -- had to reload device, now all vlans needed are available.
Thanks Gert, Chris On Sat, Apr 17, 2010 at 2:34 PM, Gert Doering <[email protected]> wrote: > Hi, > > (copying in cisco-nsp again - this might be interesting for other readers > as well, so it's useful to keep the list in CC:) > > On Sat, Apr 17, 2010 at 01:21:32PM -0400, Chris Lane wrote: > > Router#sh vlan internal usage > [..] > > I need all these vlans, how do i remove the above to make available? > > I also had ascending not descending on the policy. > > As I wrote...: > > > > You can change the vlan range used with the command > > > > > > Cisco(config)#vlan int allocation policy ? > > > ascending Allocate internal VLAN in ascending order > > > descending Allocate internal VLAN in descending order > > > > > > "descending" allocates from 4096 downward. > > "descending" allocates from 4096 downward. > > So if you want to use 1007 and up, set the policy to "descending" (most > likely, a reboot is required). > > gert > -- > USENET is *not* the non-clickable part of WWW! > // > www.muc.de/~gert/ > Gert Doering - Munich, Germany > [email protected] > fax: +49-89-35655025 > [email protected] > -- //CL _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
