Folks,
a colleauge of mine has to migrate one chassis from a single SupV-10GE to a dual SupV-1GE scenario in a few minutes. On 6500, it's possible to insert mixed supervisors into a chassis (provided that redundancy mode is not SSO or similar), would this work for 4500 as a migration path as well? The datasheet says SupII, SupIV and SupV cannot be mixed in the same chassis, but does not explicitly state on the SupV sub-variations. Any quick hints appreciated -- Tomas Daniska Senior CSE/BDM Soitron, a.s. Plynarenska 5, 829 75 Bratislava, Slovakia tel: +421 2 58224000, fax: +421 2 58224520 Good judgment comes from experience. Unfortunately, the experience usually comes from poor judgment. -- O 'Reilly's fundamentals of Aviation _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
