Try this:
http://www.cisco.com/en/US/products/hw/switches/ps628/products_tech_note09186a0080169696.shtml -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of teklay gebremichael Sent: Saturday, 24 April 2010 7:17 p.m. To: cisco forum Subject: [c-nsp] copying ios image to a cisco 2950 switch with no ios image hello i have one cisco 2950 switch with no ios image. the defaul prompt it enters is switch: and it has the following bootloader switch: ver C2950 Boot Loader (C2950-HBOOT-M) Version 12.1(11r)EA1, RELEASE SOFTWARE (fc1) Compiled Mon 22-Jul-02 17:18 by antonino i can see the boot and copy commands, but i am unable to load valid ios to flash. the list of file systems are as follows. switch: dir List of filesystems currently registered: flash[0]: (read-write) xmodem[1]: (read-only) null[2]: (read-write) bs[3]: (read-only) switch: can any body help how to load ios image to the switch? thank you in advance. Teklay _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
