On 27/04/2010, at 7:32 AM, Paul Stewart wrote: > We are getting ready to deploy some equipment (mixture of Cisco/Juniper) > that is MPLS capable. We'd like to transport some VPLS traffic however in > the middle of a few of the links are layer2 switches - we've been told this > isn't possible even with 1600 MTU frame size supported.... Juniper is > telling us (in one particular segment) that we must hang MX gear in there to > make it work with MPLS...
We run some EoMPLS vc's over MPLS links that traverse a layer2 only device. No problems as long as the switch MTU can handle the packet size. All our end-systems are connected at 1500 MTU so there's no issue as long as the L2 kit is recently new. David ... _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
