Hi, For some time we have used loop cables and port mode EoMPLS in order to both to L2 transport over MPLS and L3 termination of the same VLAN. This might sometimes result in supoptimal switching, since there's no (easy) way to make the switches understand the way the L2 and L3 topology work together.
If one were to want xconnected SVIs and "real" VPLS on a 6500/Sup720, what would one need? We need 10G, and using SIP-600 as core facing interfaces seems to be the only solution, albeit rather expensive. Are there any other options? Apart from waiting for an EARL8 supervisor for the 6500 of course. :-) -- Peter _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
