This kind of interfaces (FastEthernet) are actually Layer 2 switch ports like you would usually find on LAN switches. Shaping on SVI interfaces is usually not supported on this kind of platforms (Layer 2 switches), so this is consistent.
You can still use shaping on "real" interfaces on the 800/1800/2800/3800 routers. Arie -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Shimol Shah (shimshah) Sent: Tuesday, April 27, 2010 18:28 To: [email protected] Subject: Re: [c-nsp] traffic shape on 87x/88x/18xx SVI interfaces Take a look at: Switch Virtual Interface for Cisco Integrated Services Routers ============================================================== http://www.cisco.com/en/US/prod/collateral/routers/ps5853/prod_white_pap er0900aecd8064c9f4.html Shimol On 4/27/10 11:19 AM, Chris Flav wrote: > > >> Hi, >> >> it's not working, have to use traffic policing instead of traffic >> shaping on SVI. No way around that. > > How incredibly lame. Hardware limitation? > > C. > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
