Hi,
We have bit confusion because when we use cisco 6500 with mpls + bgp and ospf,
if we check tcam we found so:
L3 Forwarding Resources
FIB TCAM usage: Total Used %Used
72 bits (IPv4, MPLS, EoM) 524288 518838 99%
144 bits (IP mcast, IPv6) 262144 329 1%
detail: Protocol Used %Used
IPv4 292787 56%
MPLS 226050 43%
EoM 1 1%
We have 2 full route and some peering but not redistribute bgp in IGP, then we
have ospf as IGP and not redistribute ospf in BGP, why we have some route in
IPv4 and in MPLS ??
I would have BGP and OSPF only in IPv4 partition of TCAM, how to do it ??
Thanks
Matteo
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
