Peter, Most likely you would need to create a per-subnet class, and assign a policer.
You may take a look at microflow policers (available only on 6500/7600): http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/con figuration/guide/qos.html#wp1571584 Also, maybe aggregate policers may help you... http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/con figuration/guide/qos.html#wp1571923 Arie -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Peter Kranz Sent: Wednesday, May 12, 2010 21:15 To: [email protected] Subject: [c-nsp] Per subnet rate limiting (6500) simple solution? Looking for a simple solution to do per-subnet rate limiting where we have a bunch of subnet's on the same VLAN.. we a single output interface for this traffic facing the customers, but lots of upstream links to the internet.. so ideally everything could live on the customer interface.. Peter Kranz <http://www.unwiredltd.com/> www.UnwiredLtd.com Desk: 510-868-1614 x100 Mobile: 510-207-0000 <mailto:[email protected]> [email protected] _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
