you could try APNIC's IPv6 Subnet calculator
http://sourceforge.net/projects/ipcalculator/
-sunny
Sharlon Carty wrote:
Been looking for one too. Would be great to have.
-----Original Message-----
From: [email protected] on behalf of Bill Buhlman
Sent: Thu 5/13/2010 5:58 PM
To: NSP list
Subject: [c-nsp] IPv6 subnetting tools
Anyone know of an online ipv6 tool that will allow you to specify�# of �bits when calculating? Trying to subnet a /32 into /48's.
�
Thanks,
Bill
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
