Hello,
+1, importing routes from global routing table using import-map under
a vrf instance.
Using it over here.
Y.
Le 25 mai 2010 à 22:07, Kenny Sallee <[email protected]> a
écrit :
You could use VRF's for all interfaces and RT import/export the routes
between VRF's - even the 'global routes'. Use import-map's to
control what
routes make it into each VRF. You'll need to run MP-BGP to make it
work. I
basically do this where I work (different scenario but same concept).
Kenny
On Tue, May 25, 2010 at 12:08 AM, Ibrahim Abo Zaid <
[email protected]> wrote:
also is there any feature supports dynamic export of VPN routes to
global ?
i knew the reverse exist (importing IPv4 routes into VRF) but i'm
looking
for the reverse
On Tue, May 25, 2010 at 10:03 AM, Ibrahim Abo Zaid <
[email protected]> wrote:
Hi group
Iam looking for a feature can be used to route VPN internet
traffic from
global interface into VRF interface (or global and add VPN label)
normaly , that is done using static route to perform global-vrf
leaking
but i'm looking for a more scalable and dynamic solution
any ideas ?
thanks
--ibrahim
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
