Hello All One of my blade is not powering up but i can't remember the command to power it back up. Can some one please help me ? The sho mod command is below.
#sho mod Mod Ports Card Type Model Serial No. --- ----- -------------------------------------- ------------------ ----------- 1 48 48-port 10/100/1000 RJ45 EtherModule WS-X6148A-GE-45AF SAL1017L82X 2 48 48-port 10/100/1000 RJ45 EtherModule WS-X6148A-GE-45AF SAD093905SP 3 48 48-port 10/100/1000 RJ45 EtherModule WS-X6148A-GE-45AF SAD093900TK 4 48 48-port 10/100/1000 RJ45 EtherModule WS-X6148A-GE-45AF SAL1011FSAE 5 9 Supervisor Engine 32 8GE (Active) WS-SUP32-GE-3B SAD0939052K 6 48 48-port 10/100/1000 RJ45 EtherModule WS-X6148A-GE-45AF SAL1008ECF3 Mod MAC addresses Hw Fw Sw Status --- ---------------------------------- ------ ------------ ------------ ------- 1 0017.94da.a540 to 0017.94da.a56f 2.4 8.4(1) 8.7(0.22)BUB Ok 2 0015.c649.4c00 to 0015.c649.4c2f 1.2 8.4(1) 8.7(0.22)BUB Ok 3 0015.c649.d300 to 0015.c649.d32f 1.2 8.4(1) 8.7(0.22)BUB Ok 4 0017.0eb2.5680 to 0017.0eb2.56af 2.0 8.4(1) 8.7(0.22)BUB Ok 5 0013.809d.e556 to 0013.809d.e561 4.2 12.2(18r)SX2 12.2(33)SXH6 Ok 6 0017.0eb1.8a80 to 0017.0eb1.8aaf 2.0 8.4(1) 8.7(0.22)BUB PwrDown Mod Sub-Module Model Serial Hw Status ---- --------------------------- ------------------ ----------- ------- ------- 1 IEEE Voice Daughter Card WS-F6K-48-AF SAL1005C1WY 2.2 Ok 2 IEEE Voice Daughter Card WS-F6K-GE48-AF SAD093903ZR 1.2 Ok 3 IEEE Voice Daughter Card WS-F6K-GE48-AF SAD0938067D 1.2 Ok 4 IEEE Voice Daughter Card WS-F6K-48-AF SAL1010FGJL 2.0 Ok 5 Policy Feature Card 3 WS-F6K-PFC3B SAD0938037W 2.1 Ok 5 Cat6k MSFC 2A daughterboard WS-F6K-MSFC2A SAD093804E3 3.0 Ok 6 IEEE Voice Daughter Card WS-F6K-48-AF SAL1008EB9X 2.0 PwrDown Mod Online Diag Status ---- ------------------- 1 Pass 2 Pass 3 Pass 4 Pass 5 Pass 6 Not Applicable _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
