So you are asking not MSC utilization but interface. There is a SNMP mib you can use to monitor your interface utilization.
Aaron On Mon, Jun 14, 2010 at 08:06, bas <[email protected]> wrote: > Hi, > > Does anyone know if there is a command to view the utilization of a > MSC in a CRS? > > We are using the 8 port 10GE PLIMs which are 2:1 oversubscribed. > As we have primarily outbound traffic (hosting) we use half the ports > for inbound (from servers/DC) and half for outbound (to internet) > traffic. > However some ports also have bi-directional traffic. > > We currently copy/paste "monitor interface" output to excel and add up > the values (per localion) every now and then. > But it would be a lot better if we could check with a CLI command or > automatically monitor MSC utilization with a SNMP query. > > Thanks in advance, > > Bas > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
