they "seem" to "work" but trust me when i state (with a Cisco hat on) that there are good reasons we don't list the 1m/3m/5m passive CX1 as officially supported on N7K-M132XP-12 module. if you are going to use them - either cisco branded or 3rd party ones - strongly suggest you actually 'test' them in all scenarios.
suggest you reach out to your account team too. there may be other options available. cheers, lincoln. On 17/06/2010, at 2:05 AM, Ryan Hughes wrote: > Check the archive. It's come up before; they're not supported at this time > but yea they do "work". Sho int capability shows it as 10g unkown if memory > serves. > > Sent from my iPhone > > On Jun 16, 2010, at 7:57 AM, Matthew Melbourne <[email protected]> wrote: > >> Hi, >> >> Does anyone know if the copper Twin-ax cables (e.g. SFP-H10GB-CU3M) >> are supported in the N7K-M132XP-12 line card? We're running NX-OS >> 5.0(2a) and they appear to work although they're not officially listed >> on the 10GE Transceiver compatibility matrix. This intention is to use >> them for 10GE Nexus-Nexus interlinks and between Nexus and 4948-10GE >> switches (with OneX converters) where distances allow. >> >> Cheers, >> >> Matt >> >> -- >> Matthew Melbourne >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
