On Mon, 2010-06-21 at 11:58 -0500, Jeff Bacon wrote: > All I did was set "mpls ip" and "mpls mtu 1500" on the relevant SVI > interfaces.
You have "mpls ip" on both ends, right? Not that it should disrupt traffic like this though. > Shortly thereafter, TCP connections from clients off device B to vendor > off device A running via VLAN 300 started dropping packets. Not > consistently, but in bursts every few seconds. Does the switch say anything about drops? E.g. "show queueing interface GiX/Y" and "show interface GiX/Y | incl drop" on the physical interface carrying VLAN 300. Is there any system in the drops? Only large packets? Or grouped drops? -- Peter _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
