Do a "who" and see who has a hold of it. Then put an acl on the ingress interface so deny it in and out. Your exec-timeout should eventually kick it off. If not, at least they won't be able to connect again. I'd also do "clear line 3" and confirm a couple of times.
David -- http://dcp.dcptech.com > -----Original Message----- > From: bha Qaqish [mailto:[email protected]] > Sent: Tuesday, June 22, 2010 3:17 PM > To: David Prall; 'Jeff Wojciechowski'; [email protected] > Subject: RE: [c-nsp] VTY PROBLEM > > It's the same , not cleared > > Eng. Bha Qaqish > > > > > -----Original Message----- > From: David Prall [mailto:[email protected]] > Sent: Tuesday, June 22, 2010 10:14 PM > To: bha Qaqish; 'Jeff Wojciechowski'; [email protected] > Subject: RE: [c-nsp] VTY PROBLEM > > Should be "clear line 3" > > David > > -- > http://dcp.dcptech.com > > > > -----Original Message----- > > From: [email protected] [mailto:cisco-nsp- > > [email protected]] On Behalf Of bha Qaqish > > Sent: Tuesday, June 22, 2010 2:48 PM > > To: Jeff Wojciechowski; [email protected] > > Subject: Re: [c-nsp] VTY PROBLEM > > > > Yes > > I can see the session in this command , and when I make the clear > line > > vty 3 for example , its not cleared. It still exist in the show > > command > > > > Eng. Bha Qaqish > > > > > > -----Original Message----- > > From: Jeff Wojciechowski [mailto:[email protected]] > > Sent: Tuesday, June 22, 2010 9:44 PM > > To: bha Qaqish; [email protected] > > Subject: RE: VTY PROBLEM > > > > Can you see the session using show line and then clear line X (where > X= > > line number of stuck VTY session)? > > > > -Jeff > > > > -----Original Message----- > > From: [email protected] [mailto:cisco-nsp- > > [email protected]] On Behalf Of bha Qaqish > > Sent: Tuesday, June 22, 2010 1:27 PM > > To: [email protected] > > Subject: [c-nsp] VTY PROBLEM > > > > > > > > > > > > Dear > > I have a 7206 VXR WITH npeg2, there is a problem, there is a telnet > vty > > sessions that stuck , I can not clear it , its stuck for 70 weeks , I > > can not restart the router cause we are an ISP, so how could I clear > > the sessions , I have a --- exec-timeout 60 0 --- on the vty. > > Please help ASAP > > > > > > BR > > > > > > Eng. Bha Qaqish > > > > > > > > > > > > > > > > ********************* > > > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
