Hi all I've got two switches 3560 group with 2xFE on both switches and inteconnected together. port channel is L2 2 VRFs - ivan, mark 4 VLANs: - vlan 100 VRF "ivan" for interconnection between swtiches - vlan 11 VRF "ivan" for customer's connection
- vlan 200 VRF"mark" for interconnection between switches - vlan 12 VRF "mark" for customer's connection ports 12 and 13 as trunks - interconnection between switches OSPF runs over SVIs of 100 and 200. I'm strugling with load balancing: when I setup port channel load balancing dst-ip switch does correct balancing between interconnected vlans but not for customers' vlans. - vlan 100 would use port 12 - switch interconnection - vlan 200 would use port 13 - switch interconnection - vlan 11 would use port 13 - customer 1 - vlan 12 would use port 13 - customer 2 when I setup port channel load balancing src-dst-ip switch does correct balance for customers' vlans but not for interconnected vlans. - vlan 100 would use port 13 - vlan 200 would use port 13 - vlan 11 would use port 12 - vlan 12 would use port 13 Result is not full bandwidth used for both customers' traffic resp. only 100 Mbps. Any ideas how to sort it out? thanks _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
