On Wed, Jun 23, 2010 at 22:00, Richey <[email protected]> wrote: > I've been looking around and can't find a clear cut answer to this question. > Is it possible to loop up a far end T1 smart jack using a PA-MC-T3 in a > 7206? Often I open a ticket with the lec and they will take an hour or two > to let us know if they can loop the smart jack up or not. In a brilliant > move the customer's primary and secondary contact numbers are numbers on the > circuit so no one can call to verify that they have power at their site. > > > > > > Richey >
Richey, I believe the remote T1 loopback features are only for CSU/DSU. The trouble comes when you want to loop it back down - it seems that the software in the router does not have the right loop-down codes. I have successfully looped up a remote CSU/DSU but have never been able to drop it without access to the CSU/DSU that I looped and manually clearing it (or inserting a T-BIRD and sending the right loop-down code). If anyone else has experience in getting this to work, I would be interested to hear. Andy _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
