What if I went with the SUP2 and the Cisco OC-12/STM-4 ATM Enhanced Optical Services Module (OSM) on a 7603? I realize the OC-12 ATM OSM is EOL but if unsupported/cheap is the goal will it work with the Supervisor 2 with MSFC2?
Thanks again, -Rich On Fri, Jun 25, 2010 at 1:38 PM, Benjamin Lovell <[email protected]> wrote: > SUP2 will not work as I do not believe the SIP modules needed for ATM > interfaces are supported. > > SUP32 should work as long as the SIP needed is supported(not 100% sure > about SIP support on SUP32) but SUP32 can easily move this much traffic. > > SUP720/RSP720 will defiantly work. > > -Ben > > > On Jun 25, 2010, at 10:50 AM, Rich Davies wrote: > > > Hello, > > > > Someone has asked me a question regarding what Cisco router platform can > > handle an ATM OC-12. I did some digging and it seems the 7200 platform > > (with NPE-G1/G2) is unable to handle this. If a 7600 (7603 actually) > was > > used what type of SUP/RP is needed to do ATM OC-12? (will SUP2/SUP32 > work > > or is RSP/SUP 720 needed)? > > > > > > Thanks for any input. > > > > > > -Rich > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
