The older MIBs support the prefix count for IPv4. Cisco does not currently support the v2 spec that allows IPv6. That is something they really need to get fixed.
LR Mack McBride Network Architect Viawest, Inc. -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Gary T. Giesen Sent: Wednesday, June 30, 2010 8:52 AM To: Per Carlson Cc: c-nsp Subject: Re: [c-nsp] SNMP MIB for Receiving Prefix Counts for Individual Peers Seeing as that was published in Feb 2010, I doubt it's supported by anything yet... I guess I'll have to wait and see... On Wed, Jun 30, 2010 at 9:16 AM, Per Carlson <[email protected]> wrote: > Hi Gary. > >> Is anyone aware of a MIB that supports querying the number of prefixes >> (not the individual prefixes) received from a BGP peer? > > There is an I-D supporting this: > http://tools.ietf.org/html/draft-ietf-idr-bgp4-mibv2-10 > > >From the Overview section: > > This MIB addresses several of the deficiencies of the previous BGP-4 > MIB. In particular: > > o Add several counters of operational interest. For example, the > number of routes received from a given BGP peer. > > > Finding a software supporting the I-D is another story... > > -- > Pelle > > A: Because it messes up the order in which people normally read text. > Q: Why is top-posting such a bad thing? > A: Top-posting. > Q: What is the most annoying thing in e-mail? > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
