> "CBWFQ provides several variations of how to configure the bandwidth > reserved for each queue. For instance, the bandwidth 64 class subcommand > reserves 64kbps of bandwidth, regardless of the bandwidth setting on > interface. The Bandwidth percent 25 class subcommand would also reserve 64 > kbps for a class if the interface bandwidth had been set to 256kbps, using > the bandwidth 256 interface subcommand." > > >From that is seems crystal clear the the bandwidth statement on the > interface IS used for QoS. And this back to my question, should I set the > bandwidth on the Interface to match the shaped value? > > Thanks!
If you're shaping everything to a lower rate, I think it makes sense to change your bandwidth statement. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
