conf t
mls qos
!
class-map match-all CLASSNAME
match ip dscp 0
!
policy-map POLICYNAME
class CLASSNAME
police 1000000 187500 exceed-action drop
!
interface GigabitEthernet0/1
service-policy input POLICYNAME
service-policy output POLICYNAME
!
end
The numbers in the policy are CIR and BC and the formula I used is BC=CIR/8*1.5
HTH
Ziv
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Tseveendorj Ochirlantuu
Sent: Tuesday, July 06, 2010 2:37 PM
To: [email protected]
Subject: [c-nsp] Bandwidth shape on OSI Layer2
Dear all,
How to make a bandwidth shape with upload and download side on Cisco 3750
Catalyst at OSI Layer2 ?
Best regards,
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
************************************************************************************
This footnote confirms that this email message has been scanned by
PineApp Mail-SeCure for the presence of malicious code, vandals & computer
viruses.
************************************************************************************
************************************************************************************
This footnote confirms that this email message has been scanned by
PineApp Mail-SeCure for the presence of malicious code, vandals & computer
viruses.
************************************************************************************
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
