> -----Original Message----- > From: [email protected] [mailto:cisco-nsp- > [email protected]] On Behalf Of Steve Bertrand
> My network has to be this way (at this time). Many of my routers don't > have enough interfaces to full-mesh. I used to put a switch in front of > many of the routers and use sub-ints and vlans, but that became another > point of failure, one more piece of hardware to manage/configure, and a > whole lot of extra documentation. Hi Steve You don't need to have point-to-point links between all the routers in the iBGP mesh. The routers could just share a subnet (eg within a small POP). Or you might have a large network spanning multiple subnets. Either way, put the subnets and loopbacks into OSPF, and then setup your iBGP mesh between each router's loopback. Michael. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
