Thanks. That sort of worked. I was doing a 'no access-list 10' before I added the new list. But this time I reordered them and it worked. So I added the remark, added .154, then added .151. weird.
Ruben Alvarez Technical Contractor | NWEA PHONE 503.624.1951 | FAX 503.639.7873 DIRECT 503.214.4228 NWEA.ORG | Partnering to Help All Kids Learn -----Original Message----- From: Gary Buhrmaster [mailto:[email protected]] Sent: Wednesday, July 07, 2010 11:38 AM To: Ruben Alvarez Subject: Re: [c-nsp] issue with basic access-list reordering > I wanted to see if anyone knows what's going on with my basic access-list. > It's really more annoying than anything, but. So I type in this list: > > Rtr (config) #access-list 10 remark NTP access > Rtr (config) #access-list 10 permit 10.1.0.151 > Rtr (config) #access-list 10 permit 10.1.0.154 > Rtr (config) #exit > Rtr#sh run | inc access-list > access-list 10 permit 10.1.0.154 > access-list 10 remark NTP access > access-list 10 permit 10.1.0.151 > > Does anyone know why this happens? It's driving me crazy. Add in a "no access-list 10" before your config command.. Your statements are added to the existing config, but duplicates are not, and my guess is that you had a ....permit 10.1.0.154... before. So, start clean with a "no access-list 10". _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
