Ahh. I thought you were talking about multicast 'ip sdr' (aka SAP) commands.
Was going to comment about the control-plane issues you will see enabling that on the routers. - Jared On Jul 7, 2010, at 5:06 PM, My Name wrote: > Sorry guys, I meant Cisco Secure Domain Routers for the CRS platform > > thanx for replying though. > > Joe > > On Wed, Jul 7, 2010 at 4:43 PM, Jay Hennigan <[email protected]> wrote: > >> On 7/7/10 1:35 PM, Guillaume FORTAINE wrote: >>> http://www.wirelessinnovation.org >>> >>> On 07/07/2010 04:39 PM, My Name wrote: >>>> Is anyone using SDR? any problems , lessons learned, or best practices >>>> you can share? >> >> There's an app for that! >> >> http://digitalconfections.com/ >> >> -- >> Jay Hennigan - CCIE #7880 - Network Engineering - [email protected] >> Impulse Internet Service - http://www.impulse.net/ >> Your local telephone and internet company - 805 884-6323 - WB6RDV >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ >> > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
