On 7/8/10 11:57 PM, vijay gore wrote: > hi, > > heavy CRC error generating on serial link, > > anyone can tell me reason ?? solution ??
Most likely physical layer issues. Wet copper cable pairs (T-1), dirty fiber (optical), etc. Can you be more specific as to the nature of the link such as speed, internal cable or purchased WAN link from a carrier, etc.? You'll likely have to take it out of service and run loopback tests to isolate and repair the problem. If this is a new circuit turn-up it could be a configuration issue such as framing, linecode, clocking, etc. -- Jay Hennigan - CCIE #7880 - Network Engineering - j...@impulse.net Impulse Internet Service - http://www.impulse.net/ Your local telephone and internet company - 805 884-6323 - WB6RDV _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
