Hi Dalton, Using RADIUS to assign either group policy or a direct ACL is supported on newer versions of the ASA software (ie. 7.x & 8.x). I don't think you can upgrade a 506E beyond 6.x though. You could always try these options and see if they work on 506E & 6.3.x
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080a9eddc.shtml http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_configuration_example09186a00808cf897.shtml The configuration examples section for PIX/ASA has lots of good examples: http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/prod_configuration_examples_list.html regards, Tony. --- On Tue, 13/7/10, dalton <[email protected]> wrote: > Hi, > > I'm wondering if there is an elegant way to do per user > filtering for remote access accounts on a pix 506E running > 6.3.(x)? I know i can create seperate groups with different > access defined, however, this is not a solution that > would scale neatly. Though it may be my only option. > Thanks. > > dalton _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
