On Wed, 14 Jul 2010, Rich Sena wrote:
Looking for some advice on ISO to support a 6513 that is currently running
s72033-jk9sv-mz.122-18.SXD6.bin - we are going to add a 10G card
(WS-X6708-10GE CEF720 8 port 10GE with DFC)
The switch is a data center core and has a twin that it works HA via HSRP for
all the data center subnets.
I think you will need to upgrade to a newer IOS to get support for that
module. The link below suggests that you need at least 12.2(18)SXF5.
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/release/notes/hardware.html#wp3743782
I'm running 12.2(33)SXH5 and have several 6708s in service. Everthing
seems to work fine.
jms
Has the following
1 24 CEF720 24 port 1000mb SFP WS-X6724-SFP
2 24 CEF720 24 port 1000mb SFP WS-X6724-SFP
3 24 CEF720 24 port 1000mb SFP WS-X6724-SFP
7 2 Supervisor Engine 720 (Active) WS-SUP720-BASE
8 2 Supervisor Engine 720 (Hot) WS-SUP720-BASE
9 8 Network Analysis Module WS-SVC-NAM-2
12 4 SLB Application Processor Complex WS-X6066-SLB-APC
13 1 SSL Module WS-SVC-SSL-1
--
Rich Sena - [email protected]
ThickNET Consulting
"On the way to understanding; you understand, and forget."
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
