Pshem Kowalczyk wrote: > Hi, > > I have a situation, where a customer wants a full BGP table > (persuasion failed already), but is connected to small router (2821), > with not enough memory to get anywhere near full table. I have few > other routers (ASR1K, 7600) that would normally be used for that, but > are in far-away locations. Of course I can set up a local BGP session > and then add a multihop one for the full feed, but that doesn't seem > like an elegant solution any more. All the routers run MPLS, so if I > could get a xconnect going between one of the bigger boxes and the > small PE, without actually wasting port on the bigger router (by > having some sort of logical interface) then I could run the BGP > session directly. I had a look on Cisco website, but either it's not > possible or that kind of bridging has a special name that I can't pin > down. If you've heard of such feature - please let me know.
To not answer the question directly, you can put enough memory in a 2821 to take a full table easily - they'll support 1Gb. Regards Pete _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
