Yes our setup is cat6k HSRP therefore they will need to change the load balance method until we move them to nexus VPC (a current project).
Aaron. Sent from my iPhone On 17/07/2010, at 4:06 PM, Lincoln Dale <[email protected]> wrote: > > On 17/07/2010, at 4:55 PM, Aaron Riemer wrote: > >> Thanks Lincoln. >> >> The server team must be using the "Route based on IP hash" method then. >> >> "All adapters in the NIC team must be attached to the same physical switch >> or an appropriate set of stacked physical switches." > > also ensure you pay attention to the sentence after that one. the one that > says: > "That switch or set of stacked switches must be 80.ad-com- pliant and > configured to use that link-aggregation". > > it also talks about "set of stacked switches" with the context being if the > switch / switch vendor you're plugging in to supports link aggregation across > a stack or multiple physical switches. > > in Cisco terms this means it must be VSS (Catalyst 6500), vPC (Nexus 5000, > Nexus 7000) or etherchannel in a Catalyst 3750 stack. > > > cheers, > > lincoln. > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
