Ok, here's the config for one of the two routers - they have the same basic HSRP config so if one is wrong, so is the other. Remember, the other end of the tunnel is NOT exhibiting the problem at all.
! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname rem16-miramar-r2 ! boot-start-marker boot-end-marker ! logging count logging message-counter syslog logging buffered 51200 no logging console ! no aaa new-model ip source-route ! ! ! ! no ip cef ip domain lookup source-interface FastEthernet0/0 ip domain name cell2.psap.bc.local ip multicast-routing no ipv6 cef ntp server 10.3.0.1 multilink bundle-name authenticated ! ! archive log config hidekeys ! ! ip tftp source-interface FastEthernet0/0 ! track 1 interface Serial0/1/0 ip routing ! ! ! ! interface Tunnel16 description *** TUNNEL FOR VSS 16 (Multicast only) *** ip address 10.250.16.1 255.255.255.252 ip pim query-interval 1 ip pim state-refresh origination-interval 4 ip pim dense-mode ip tcp adjust-mss 1436 no ip mroute-cache keepalive 1 1 tunnel source 10.16.15.254 tunnel destination 10.3.15.254 ! interface FastEthernet0/0 description *** BACKROOM *** ip address 10.16.15.252 255.255.240.0 ip access-group 100 out ip helper-address 10.3.0.1 ip pim dr-priority 255 ip pim query-interval 1 ip pim state-refresh origination-interval 4 ip pim dense-mode no ip mroute-cache speed 100 full-duplex keepalive 1 standby delay minimum 45 reload 60 standby 1 ip 10.16.15.254 standby 1 timers 1 3 standby 1 preempt delay minimum 15 reload 15 sync 15 standby 1 track Serial0/1/0 ! interface FastEthernet0/1 description *** CROSSOVER R2 R1 *** ip address 10.252.216.2 255.255.255.0 ip hello-interval eigrp 2604 1 ip hold-time eigrp 2604 2 speed 100 full-duplex keepalive 1 ! interface Serial0/1/0 ip address 10.252.16.2 255.255.255.252 ip hello-interval eigrp 2604 1 ip hold-time eigrp 2604 3 keepalive 4 no fair-queue service-module t1 timeslots 1-24 ! router eigrp 2604 passive-interface FastEthernet0/0 network 10.16.0.0 0.0.15.255 network 10.252.0.0 0.0.255.255 no auto-summary eigrp stub connected ! ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 10.252.216.1 240 ! ! no ip http server ip dns server ip mroute 10.0.0.0 255.0.0.0 10.250.16.2 ! ip access-list standard AllSites permit 10.0.0.0 ip access-list standard MyRemoteSite permit 10.16.0.0 0.0.15.255 ! logging source-interface FastEthernet0/0 logging server-arp logging 10.4.0.1 access-list 100 deny udp 10.4.0.0 0.0.15.255 any gt 5000 access-list 100 permit ip any any access-list 101 deny udp 10.3.0.0 0.0.15.255 any gt 5000 access-list 101 permit ip any any ! route-map REM-LEAK-LIST permit 10 match ip address AllSites match interface FastEthernet0/1 ! route-map REM-LEAK-LIST permit 20 match ip address MyRemoteSite match interface Serial0/1/0 ! ! ! control-plane ! ! ! line con 0 login local line aux 0 line vty 0 4 exec-timeout 0 0 login local transport input telnet line vty 5 15 exec-timeout 0 0 login transport input telnet _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
