Been there, done that, got the t-shirt. I strongly endorse using debug conditions to minimize the chance of locking up.
Frank -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of P C Sent: Wednesday, July 28, 2010 11:23 AM To: [email protected] Subject: [c-nsp] Safe debug commands for ATM DSL PPPoE troubleshooting? We have a Cisco 7201 which takes in an ATM DS3 from the telco on which ADSL connections running PPPoE are terminated. At times when troubleshooting using all other methods fail, we need to debug connection problems for an individual site or PVC. However with the quantity of connections on the BRAS, debugging can be dangerous at best, and the wrong command can effectively hang the device. Does anyone know (from experience) what debug commands are safe on a BRAS like this, and what combination of more "unsafe" commands and debug condition statements have you also find acceptable? Code is 12.2SRE1 on a 7201. Thanks! _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
