Anyone,
I'm having issues with some 4510s with dual Sup6-E running
12.2(53)SG2 doing this on interface range command. Making our deployment
kind of tough:SCUAS01(config-if)#interface range GigabitEthernet1/1 - 48 SCUAS01(config-if-range)# switchport mode access %ERROR: Standby doesn't support this command % Command failed on interface. Aborting SCUAS01(config)# In the release notes it claims a similar issue was fixed: http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/release/note/OL_51 84.html CSCsa67042 But that's from a while ago. I'm told by our installer guy that occasionally it is accepted, seems to depend on if the switch was recently rebooted, he claims. The interface type is correct. I tried using bug navigator, but it's not giving me any results, not sure if it's working right today, or if I've got a browser issue. Any help appreciated. Thanks, Chuck
smime.p7s
Description: S/MIME cryptographic signature
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
