I'm using 4.1(3)N2(1) and the "log" option is not available.
Should i guess an upgrade is needed, although release notes do not
mention anything?
--
Tassos
Arie Vayner (avayner) wrote on 10/08/2010 12:43:
Tassos,
Looking here:
http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/command
/reference/rel_4_2_1_N2_1/security_cmd_ref.html#wp1279114
I can see the 'log' option listed...
Arie
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Tassos
Chatzithomaoglou
Sent: Monday, August 09, 2010 22:22
To: [email protected]
Subject: [c-nsp] ACL logging on n5k
N5k datasheet says it's supported, but i couldn't find any other
reference.
Is it supported and if yes, how do you enable it?
--
Tassos
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
