NCG? http://www.netomata.com/products/ncg
-James On Fri, Aug 13, 2010 at 10:37 AM, john heasley <[email protected]> wrote: > Fri, Aug 13, 2010 at 10:19:20AM -0700, Eric Cables: > > On Thu, Aug 12, 2010 at 12:42 PM, Brandon Ewing <[email protected] > >wrote: > > > On Thu, Aug 12, 2010 at 01:24:24PM -0600, Saxon Jones wrote: > > > > CiscoWorks LMS or even RANCID will work for this. On a box with > RANCID > > > > installed it's done like so: > > > > > > > > for host in router1 router2 router3; do clogin -c"config t;no ip > > > > access list extended asdf;ip access list extended asdf permit any > > > > any;end;write mem" ${host}; done > > also see share/cisco-load.exp in the rancid tar file as an example of > doing this with clogin -s file.exp hostname [...]. > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > -- James Kelty Lead Network Engineer "Clams are eeeeeeeeevil...." - Maisie K. Age 3 _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
