Guys, Anyone knows how to solve this on dynamips? (router with lan switch connection) - I thought that setting speed auto would solve it.
R3# *Mar 1 00:12:08.323: %SYS-5-CONFIG_I: Configured from console by console *Mar 1 00:12:10.027: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state t o up *Mar 1 00:12:11.027: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern et0/0, changed state to up *Mar 1 00:12:23.527: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on Fast Ethernet0/0 (not full duplex), with Router FastEthernet1/3 (full duplex). *Mar 1 00:12:24.079: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on Fast Ethernet0/0 (not full duplex), with Router FastEthernet1/3 (full duplex). *Mar 1 00:12:26.295: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on Fast Ethernet0/0 (not full duplex), with Router FastEthernet1/3 (full duplex). *Mar 1 00:13:10.571: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on Fast Ethernet0/0 (not full duplex), with Router FastEthernet1/3 (full duplex). R3# R3# *Mar 1 00:13:59.455: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on Fast Ethernet0/0 (not full duplex), with Router FastEthernet1/3 (full duplex). Rgs, _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/