Folks, everyone knows it's possible to set the P bit of T7 LSA to 0 at the ASBR using the not-advertise keyword of the summary-address command, such as
router ospf 1 summary-address 141.108.10.0 255.255.255.0 not-advertise but is there anything similarly possible with the redistribute command? I.e., I need to do 'redistribute static' at an NSSA ASBR, but want to have some of the T7 LSAs with P=0. Let's say there are lots of such routes and I can't have them summarized, and I want to avoid manually entering a summary-address for each of them. No such keywords for the redistribute command, nor there are such possibilities in a route-map. Thanks! -- Tomas Daniska Senior CSE/BDM Soitron, a.s. Plynarenska 5, 829 75 Bratislava, Slovakia tel: +421 2 58224000, fax: +421 2 58224520 Good judgment comes from experience. Unfortunately, the experience usually comes from poor judgment. -- O 'Reilly's fundamentals of Aviation _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
