You should be able to advertise a default route in both global- and VRF table.
As Phil said with the default-information originate/redist static or if you want to unconditionally advertise a default route use the "neighbor a.b.c.d default-originate" With this command you don't need to have a default route present in the routing table. The drawback is however if your default route fails, you will still advertise one, potentially causing a black hole. Regards Roger On Thu, Aug 26, 2010 at 8:18 AM, Phil Mayers <[email protected]> wrote: > On 08/26/2010 12:58 AM, Jason Lixfeld wrote: >> >> I'm fiddling with my lab, attempting to edumacate myself on L3VPNs. >> I'm trying to figure out the best way to get a default route into my >> test vrf. Since I'm doing BGP between all my PEs, it seems sensible >> that I try to originate the default route in BGP instead of >> redistributing it from another protocol. I'm having problems doing >> this. > > router bgp xxx > address-family ipv4 vrf TEST > default-information originate > redis static > ip route vrf TEST 0.0.0.0 0.0.0.0 ... > > ...is one way. Possibly I am missing your point though? > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
