On 9/1/10 7:55 AM, bored to death wrote: > hi, > > thanks for the reply. > > the document you pointed out > (http://www.cisco.com/web/partners/downloads/765/tools/quickreference/routerperformance.pdf) > was good for the start, thank you. but it was very limited. > it just had the result for switching of 64Byte frame packets, not any static > or > dynamic routing results nor any results about other frame sizes. > as i know, the normal frame size of ordinary networks are 1500Bytes which is > very bigger than 64Byte. for example, in this document, the maximum switching > throughput for a 2821 router is ~90Mbit/s which is very low for a gigabit > router > (of course it's because of very small frame size). >
The 2821 has gigabit interfaces, but it's most certainly not a "gigabit" router. ~Seth _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
