The only time i wanted to use it was on our ASR1004 wich didn't support it :) (and that was for troubleshooting input errors on the interface so i doubt those would have shown up (was recieving packets in an unconfigured vlan))
Op 1-9-2010 21:35, Rodney Dunn schreef: > Yep! Here is the quick wiki page with an example on CSC (Cisco Support > Community): > > https://supportforums.cisco.com/docs/DOC-5799 > > I'm working to get the functionality expanded and wanted some direct customer > references to this being helpful to speed up issue resolution, reduce > down time, etc.. > > Rodney > > > > > > On 9/1/10 2:15 PM, Fred Jordan wrote: >> A much better link: >> http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_packet_capture_ps6441_TSD_Products_Configuration_Guide_Chapter.html >> >> >> On 9/1/2010 11:52 AM, Rodney Dunn wrote: >>> http://www.cisco.com/go/epc >>> >>> For those of you that have used it and find it helpful in solving >>> problems in the network and would be willing...could you send me a >>> short quote *offline please* about the value it has been to you and how. >>> >>> Rodney >>> >>> _______________________________________________ >>> cisco-nsp mailing list [email protected] >>> https://puck.nether.net/mailman/listinfo/cisco-nsp >>> archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ Erik Versaevel _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
