On Thu, 9 Sep 2010 10:02:46 +0200, you wrote: >> *Maximum* transmit power is 4 dBm and max receive is -1 dBm, so an >> attenuator is certainly highly recommended for short distances.
> Yes, but it won't be transmitting max power for sure. No... it might be transmitting with only 2, or even 0 dBm, but that's still too much. > All I'm saying that it will work even without attenuators. Yeah, you're likely to get a link. That's certainly not the same thing as it being a recommended setup for production. > He can always check power levels and see if there is a need for an > attenuator. You are aware that the power levels can and do change? The attenuator might be 1$, so why bother trying to run something out of spec? -A _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
