Tassos, - It also holds onto a lot of logs, and configuration commands, even long after one has cleared them. - Configuration mode and enable mode share a common command buffer, so in config mode hitting up arrow gets you "conf t" and "show whatever" along with previous config commands, and in enable mode hitting up arrow still gets you config bits from the previous configuration attempt. - The terminal is pretty rough, it defaults to color-xterm and it seems to be hard coded in terms of how it responds to control sequences. I've not spent much time on in, but it redraws the screen funny, and sometimes you need to move your terminal scroll buffer tab up and down or issue a redraw to get the correct output. Can I suggest termcap or terminfo please? - The command syntax changes from release to release, even more so than IOS.
There's a laundry list of other things, but this is what comes to mind before my coffee, Janet On Sun, Sep 19, 2010 at 7:12 AM, Tassos Chatzithomaoglou <[email protected]> wrote: > I noticed that when a remote user logs into a n5k and then logs out, the > "show user-account" command still displays the user credentials. > Waiting for some time or clearing manually the user from config mode (?), > fixes the above. > Is there a timer for such cached entries that can be changed? Is it possible > to disable this caching? > > -- > Tassos > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
