Omar, Reading here: http://www.cisco.com/en/US/prod/collateral/modules/ps10598/ordering_guid e_c07_557736_ps10538_Products_Data_Sheet.html
You can find this text: Both the Cisco 3925 and Cisco 3945 can be ordered with dual power supplies that can be configured for power supply redundancy or increased power for Power-Over-Ethernet (POE) devices when operated in a non-redundant POE Boost Configuration. The primary and the secondary power supplies can be AC, POE or DC or any combination thereof. In order to power ports on a switch module integrated into a router, it is important to order the router with POE Power Supply. Arie -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of omar parihuana Sent: Thursday, September 16, 2010 17:15 To: [email protected] Subject: [c-nsp] mix AC/DC power supply in Cisco 3945E Hi Guys, Can I use two differents power supply (one DC and one AC) in the same 3945E chassis?? I mean in one slot PWR-3900-AC and in the other slot PWR-3900-DC I've checked the cisco DOC, but maybe I'm misunderstanding but I suppose that is possible to install or AC or DC and not AC and DC in the same chassis. Please your help will be appreciated. Rgds. -- Omar E.P.T ----------------- Certified Networking Professionals make better Connections! _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
