Could be a bunch of things - has it always happened, or only just started. - Fibre - RX strength too high - RX strength too low
What issues are you seeing on the other end? On 22 September 2010 22:43, Good One <[email protected]> wrote: > > > > I have a 10G circuit over DWDM which is flapping very frequently > occasionally. DOWN to UP state takes 5 second most of the time, just > wondering what could be causing this. > > > > Sep 22 21:47:46 T12 mib2d[2061]: SNMP_TRAP_LINK_DOWN: ifIndex 117, > ifAdminStatus up(1), ifOperStatus down(2), ifName xe-5/0/0 > Sep 22 21:47:51 T12 mib2d[2061]: SNMP_TRAP_LINK_UP: ifIndex 117, > ifAdminStatus up(1), ifOperStatus up(1), ifName xe-5/0/0 > Sep 22 21:49:28 T12 mib2d[2061]: SNMP_TRAP_LINK_DOWN: ifIndex 117, > ifAdminStatus up(1), ifOperStatus down(2), ifName xe-5/0/0 > Sep 22 21:49:33 T12 mib2d[2061]: SNMP_TRAP_LINK_UP: ifIndex 117, > ifAdminStatus up(1), ifOperStatus up(1), ifName xe-5/0/0 > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
