I'm trying to figure out QoS on a 2960 - something I've read about a lot but never had to do before. I'm very simply attempting to limit a customer to speed X, 8M for example. So far I have this:
! mls qos srr-queue input bandwidth 100 1 mls qos srr-queue input buffers 100 0 mls qos srr-queue input priority-queue 2 bandwidth 0 class-map match-all customerX match access-group name customerX policy-map customerX class customerX police 8000000 100000 exceed-action drop interface FastEthernet0/1 srr-queue bandwidth limit 10 service-policy input customerX ! Other than the fact that the "download" only gets at granular as 10%, will this work? I previously tried applying 8 meg policers (with mls qos srr-queue defaults) on both the customer's port and the uplink port, but the net result seemed to be about a 3 to 5 meg max rather than closer to 8. This customer is alone on the switch. ~Seth _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
