Try using 1360, I *think* this is the Cisco standard, either way we use that without problem.
Cheers Mike Company Registration number: 197807; Place of Registration: England; Registered office address: Weybridge Business Park, Addlestone Road, Addlestone, Surrey, KT15 2UP Confidentiality Notice: This message, together with its annexes, contains information to be deemed strictly confidential, that may be legally privileged and is destined only to the addressee(s) identified above who only may use, copy and, under his/their responsibility, further disseminate it. If anyone received this message by mistake or reads it without entitlement is forewarned that keeping, copying, disseminating or distributing this message to persons other than the addressee(s) is strictly forbidden and is asked to transmit it immediately to the sender and to erase the original message received. Thank you. Please consider the environment before you print this message. Thank you.-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Stephane MAGAND Sent: 23 September 2010 09:50 To: Heath Jones Cc: [email protected] Subject: Re: [c-nsp] IPSec => Speed problems ? Speed, the customer said that slow and a lot of disconnect on application. Do you know if my MTU is correct ? (mss fix and other) ? 2010/9/22 Heath Jones <[email protected]>: >> i request your help because we have a problems of speed between two >> site. > > What is the problem, exactly? > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
