________________________________________________________________________

Change to minimum prefix size on APNIC IPv4 address blocks
________________________________________________________________________


In response to feedback from the community at APNIC 30, the prefix size
on all APNIC IPv4 address blocks has been changed to a /24.

This change enables the IPv4 transfer policy to apply to all APNIC
ranges. The new size also allows Members to downgrade their membership
by returning unused IPv4 addresses.

Please update your network configurations, such as router filter sizes
based on the IPv4 address block minimum prefix size where required.

For more information on IPv4 prefix sizes, please refer to:

        http://www.apnic.net/db/min-alloc.html

If you have any questions please contact the APNIC Helpdesk at:

        [email protected]
        

Kind regards,

________________________________________________________________________

APNIC Secretariat                                 [email protected]
Asia Pacific Network Information Centre (APNIC)   Tel: +61 7 3858 3100
PO Box 2131 Milton, QLD 4064 Australia            Fax: +61 7 3858 3199
Level 1, 33 Park Road, Milton, QLD                http://www.apnic.net
________________________________________________________________________
 * Sent by email to save paper. Print only if necessary.

_______________________________________________
cisco-nsp mailing list  [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Reply via email to