%ACE-1-106028: WARNING: Unknown error while processing service-policy.
Incomplete rule is currently applied on interface vlan11. Manual roll back to
a previous access rule configuration on this interface is needed.
I receive the above error when I have any criteria assigned to the class-map
for instance:
class-map type management match-any REMOTE_ACCESS
2 match protocol icmp any
policy-map type management first-match REMOTE_MGMT_ALLOW_POLICY
class REMOTE_ACCESS
permit
interface vlan 11
ip address x.x.x.x 255.255.255.0
access-group input ALL
service-policy input REMOTE_MGMT_ALLOW_POLICY
no shutdown
Cisco docs say there is something wrong with the class-map, but for the life of
me I can't figure it out. Would anyone be willing to make suggestions of what
to look at? Or is it a false message?
~J
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
