Keegan, When there is no congestion I don't need it to do anything. The config that Ben posted is exactly what I'm looking for.
On Tue, Oct 5, 2010 at 11:20 PM, Keegan Holley <[email protected]>wrote: > Do you really need he qos configuration to do anything when there's no > congestion? In other words if you're only using 5m or so and everything is > ok what would you want the qos to do there? If you make af and ef priority > queues you can ensure that traffic is given priority and also that it does > not starve other flows. The one caveat is that when here's no congestion > they still will use more than 2m each. I'm no qos expert but i know can > assign drop probability so that certain traffic is dropped at a higher rate, > but even that is only done during times of congestion. I'm not sure if you > need you policy when there's no congestion. Unless I'm missing something. > > Sent from my iPhone > > On Oct 5, 2010, at 10:49 PM, Chris Evans <[email protected]> wrote: > > > I'm struggling to come up with a solution for my requirement.. > Essentially > > we are building a lab using GRE to link two sites over our enterprise > > network. As this is a lab we want to limit the bandwidth that comes out > of > > the LAB to 15megabits, but using GigE for the physical connection on an > > asr1k. Essentially my first thought was implement a policer on the egress > > interface limiting the maximum aggregate traffic to 15Mb, then qos > scheduler > > on the tunnel interface or egress GigE. I need to prioritize certain > traffic > > leaving the lab so I also want to use a scheduler to make sure that the > > voice traffic has priority and has a 2Mb of traffic for example. > > > > I want to limit my EF traffic to 2Mb, AF to 2Mb, NC to 500Kb and best > effort > > to 10.5Mb under signs of congestion within that 15Mb CIR. My challenge is > > that QoS only kicks in under signs of congestion, how would you allow the > > dynamic bandwidth allocation when the egress interface is really a GigE? > > > > Anyone have a good configuration that would fit my needs? > > > > Thanks > > > > Chris > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
