Hi all,
I'm using a 7200-G2 with the the following:
Software: IOS Version c7200p-adventerprisek9-mz.124-15.T6.bin
3 Packet over SONET interfaces
NAME: "module 1", DESCR: "POS Port Adapter (SM)"
PID: PA-POS-OC3SMI= , VID: N/A, SN: 25403598
(Interface POS1/0
Hardware is Packet over Sonet)
I'm running BGP with this box.
During test performed by the provider, they did physical loopback on
interfaces, that causes the box to crash, is there an option the
interface down when loop is detected?
Regards.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
