--- On Wed, 13/10/10, Jeferson Guardia <[email protected]> wrote:
> Guys,
>
> Why ospf takes so long to load when labbing on dynamips?
> Particulary in lan
> segments it almost takes forever ,if anyone has any method
> to improve the
> convergence time, I would love to hear it!
More RAM or more CPU if your box is struggling ? I know that when I have large
dynamips setups and I do a "wr mem" on a router it can cause OSPF to flap.
Have you lowered the OSPF timers ?
I have used one second OSPF hello timers on dynamips LAN segments without any
problems. Convergence takes 4-5 seconds on a link going down. The only thing
that might be different is that I only ever had two devices on the LAN segment
(ie. I was using it to simulate a point to point link).
regards,
Tony.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
